Lihlahisoa
Sensor ea indasteri ea Sensor ea 4 Searce
| Likarolo | Libaka tse 4 li thatafatsa + likarolo tse 2 li fella |
| Botenya ba boto | 1.60mm + 0.2mm |
| Lintho tse bonahalang | Fr4 TG150 + polymide |
| Botenya ba copper | 1 oz (35um) |
| Qetellong | Enig au tenk ea 1um; Ni botena 1 |
| Hole (limilimithara) | 0.21mm |
| Bophara ba mohala oa mohala (mm) | 0.15mmm |
| Mehala ea mehala (mm) | 0.15mmm |
| Leske ea Maske | Botala |
| 'Mala oa Legend | Tšoeu |
| Ts'ebetso ea Mehani | V-scoring, CNC ea cnc ea (routing) |
| Packing | Mokotla oa anti-Static |
| Teko ea e-mail | Probe e fofang kapa fixture |
| Maemo a amohelehang | IPC-A-600h Class 2 |
| Kopo | Li-elektroniki tsa likoloi |
Kenyelletso
Li-PCB tsa Rigid & Flex li kopantsoe le liboka tse thata ho theha sehlahisoa sena sa bohloeki. Likarolo tse ling tsa ts'ebetso ea ho etsa lintho li kenyelletsa potoloho e feto-fetohang e fetang ka liboto tse thata, e tšoanang le
moralo o tloaelehileng oa potoloho ea karete.
Moqapi oa boto o tla eketsa ho beoa holim 'a masoba (a PTHs) le lipotoloho tse nang le potoloho e le' ngoe e le karolo ea ts'ebetso ena. PCB ena e ne e tloaelehile ka lebaka la bohlale ba eona, ho nepahala le maemo.
Li-PCB tsa Rigid-Flex Foclufd moralo oa elektroniki ka ho tlosa likhoele tse nang le maemo, likhomphutha le wiring ka bomong. Likopano tse thata le tse fofang li ile tsa kopanngoa ka tieo sebopeho sa ka kakaretso sa board, se ntlafatsang ts'ebetso ea motlakase.
Baenjiniere ba ka lebella hore ho be le tokelo ea ho nepahala haholo
Lintho tse bonahalang
Thepa ea Substrate
Ntho e tsebahalang haholo e tsebahalang ka ho fetisisa e lohiloeng ka fiberglass. Mokokotlo o tukang oa Epoloxy o koaloa fiberglass ena.
Leha ho le joalo, fiberglass ea EPOXY e ne e sa na bonnete. E ke ke ea ema ka mokhoa o sa khaotseng le ho tsitsipana.
Polyimide
Lintho tsena li khethoa hore e be feto-fetoha le maemo. E tiile ebile e khona ho mamella likhakanyo le mefoka.
Polymimide e ka mamella mocheso. Sena se etsa hore e be e loketseng likopo ka mocheso oa mocheso.
Polyester (Pet)
Phoofolo ea lapeng e rarollotsoe litsebi tsa eona tsa motlakase le ho fetoha le maemo. E hanyetsa lik'hemik'hale le mongobo. Kahoo e kanna ea sebetsa maemong a matle a indasteri.
Ho sebelisa karolo e loketseng ho netefatsa matla le ho phela bophelo bo bolelele. E nka likarolo tse kang ho hanyetsa mocheso le ho tsitsipana ha bophahamo ha u khetha substrate.
Marena a polyimide
Mocheso oa mocheso oa khopiso ena o etsa hore o be motle bakeng sa mosebetsi. E ka mamella 500 ° C. Ho hanyetsa mochesong a eona hoa mocheso ho etsa hore e be le boikarabelo bo fapaneng ba likobo tse fapaneng.
Merashe ea Polyester
Merashe ena e na le pholoho e ngata ho feta lipapatso tsa polyimide.
Li ntle bakeng sa ho etsa lipotoloho tsa motheo tsa ho phatloha ho phatlohang.
Kamano ea bona le eona e fokola. Lits'ebetso tsa polyester hape ha se mocheso mocheso. Li ntlafalitsoe haufinyane. Sena se ba fa hate ea mocheso. Phetoho ena e boetse e matlafatsa maemo a ho ikamahanya le maemo. Sena se etsa hore ba bolokehe sebokeng sa multiler PCB.
Marang-rang a Acrylic
Merashe ena e phahame. Ba na le botsitso ba ho futhumatsa bo botle khahlanong le tsamaiso le lik'hemik'hale. Ho bonolo ho li sebelisa ebile e theko e tlaase. Kopanoa le ho fumaneha ha bona, ba tsebahala har'a bahlahisi. Baetsi.
EPOXIES
Mohlomong ena ke tšebelisano 'moho ka ho fetisisa ea ho etsa lintho ka thata tsa potoloho ea li-flax. Ba ka mamella ho tsamaea le sesosa sa lithemparetsi tse phahameng le tse tlase.
Li boetse li tsitsitse haholo ebile li tsitsitse haholo. E na le sengole se chesang ho sona se etsang hore e be kotsing haholoanyane.
Stack-up
Li-stack-op ea li-pcb tsa Rigid-ex ke e 'ngoe ea likarolo tse ngata nakong ea
Seaparo sa Rigid-Ex sex mme se thata ho feta tekano
Litoropo tse thata, a re li boneng likarolo tse 4 tsa li-pcb tsa Rigid-ex ka tlase:
Maskho a Maqhubu a Phahameng a Phahameng
Bokaholimo ba holimo
Diectric 1
Signal roseer 1
DestricTric 3
Signal Kaler 2
Destrictric 2
Mokato o ka tlase
Lesole le ka tlase
Bophahamo ba pcb
| Bophahamo ba board board | |
| Palo ea likarolo: | Likarolo tse 1-42 |
| Lintho tse bonahalang: | Fr4 \ High TG FR4 \ Etella litaba tsa mahala \ CEM1 \ CEM3 \ Aluminium \ Aluminium \ Aluminium \ Aluminium \ Aluminium \ aluminium \ |
| Seaparo sa cu se kantle: | 1-6OZ |
| Tsela e ka hare ea cu bundy: | 1-4oz |
| Sebaka se boholo se sebetsang: | 610 * 1100mmm |
| Botenya ba boto: | Libaka tse 2 0.3 (12mil) Libaka tse 4 0.4mm (16mil)Libaka tse 6.8 (32mil) Libaka tse 8 1mmm (40mil) Likarolo tse 10 1.1mm (44mil) Litšoele tse 12 1.3mm (52mil) Libaka tse 14 1.5mm (59mil) Libaka tse 16 1,6mm (63mil) |
| Bophara Bonyane: | 0.076mm (3mil) |
| Sebaka se tlase: | 0.076mm (3mil) |
| Boholo ba lesoba (lesoba la ho qetela): | 0.2mm |
| Karolelano ea karohano: | 10: 1 |
| Sear ea ho cheka: | 0.2-0.65mm |
| Mamello e chesang: | + \ - 0.05mm (2mil) |
| TLHOKOMELISO EA PT: | Φ0.2-1.6Mmm + \ - 0.075mm (3mil) Φ1.6-6.3 \ - \ - 0.1mm (4mil) |
| Mohopolo oa NPTH: | Φ0.2-1.6Mmm + \ - 0.05mm (2mil) Φ1.6-6.3mmm + \ - 0.05mm (2mil) |
| Mamello ea board ea ho qetela: | Bophahamo <0,8mm, mamello: +/- 0.08mmmm |
| 0.8mmghtthickness ≤6.5mm, mamello +/- 10% | |
| Bonyane ba Matlooa a Bonyane: | 0.076mm (3mil) |
| Ho sotha le ho khumama: | ≤0.75% Min0.5% |
| Raneg ea TG: | 130-215 ℃ |
| Ho mamella ho na le mamello: | +/- 10%, Min +/- 5% |
| Phekolo ea holimo: | Hasl, lf hasl |
| Ho qoelisoa khauta, khauta ea khanya ea khauta, monwana oa khauta | |
| Silver, Cormerice Tin, OSP | |
| Khetla ea khauta ea khauta, botenya ba khauta ho fihla ho 3um (120u ") | |
| Khatiso ea khabone, peelable s / m, enepig | |
| Bokhoni ba boto ea aluminium | |
| Palo ea likarolo: | Karolo e le 'ngoe, likarolo tse peli |
| Boholo ba boto: | 1500 * 600mm |
| Botenya ba boto: | 0.5-3.0mm |
| Mokotla oa koporo: | 0.5-49z |
| Boholo ba lesoba: | 0.8mm |
| Bophara Bonyane: | 0.1mm |
| Sebaka se tlase: | 0.12mmmmmm |
| Boholo ba pad: | 10 micron |
| Phele: | Hasl, osf, enj |
| Ho palama: | CNC, Pushing, V-Cut |
| Equipement: | Tekanyo ea bokahohleng |
| Ho fofa ho fofa / seporo se khuts'oane | |
| Microscope e phahameng ea matla | |
| Kit ea STOREERARARARARARARARARARARARARARARARARARARARARASTE | |
| Teba ea Peel matla | |
| High volt e bulehileng e bulehileng le e khutšoane | |
| Moqhaka oa karolo ea karolo ea karolo ea karolo e nang le polisher | |
| Fpc bophahamo | |
| Likarolo: | Likarolo tse 18 |
| Botenya ba boto: | 0.05-0.5mm |
| Mokotla oa koporo: | 0.5-3oz |
| Bophara Bonyane: | 0.075mm |
| Sebaka se tlase: | 0.075mm |
| Ka boholo ba lesoba: | 0.2mm |
| Boholo ba laser saleser: | 0.075mm |
| Boholo ba Pulungo ea Pulungo: | 0.5mm |
| Mamello ea Sesole: | + \ - 0.5mm |
| Bonyane mamellehang | + \ - 0.5mm |
| Phele: | Hasl, LF hasl, silifera silevera, khauta e sililoeng khauta, khauta ea flash, osp |
| Ho palama: | Ho putlama, laser, sehiloeng |
| Equipement: | Tekanyo ea bokahohleng |
| Ho fofa ho fofa / seporo se khuts'oane | |
| Microscope e phahameng ea matla | |
| Kit ea STOREERARARARARARARARARARARARARARARARARARARARARASTE | |
| Teba ea Peel matla | |
| High volt e bulehileng e bulehileng le e khutšoane | |
| Moqhaka oa karolo ea karolo ea karolo ea karolo e nang le polisher | |
| Matla a thata | |
| Likarolo: | Likarolo tsa 1-28 |
| Mofuta oa thepa: | FR-4 (High Tg, Halagen Free, Frequency Frequency) PTF, BT, Getek, Aluminium Base, KB, Nanya, Iteq, Nelco, Roger, Alon |
| Botenya ba boto: | 6-240Mil / 0.15-6.0 |
| Mokotla oa koporo: | 210um (6oz) bakeng sa karolo ea kahare 210um (6oz) bakeng sa mokatong o kantle |
| Metsotso ea methapo ea kutlo: | 0.2mm / 0,08 " |
| Karolelano ea karohano: | 2: 1 |
| Boholo ba Max Panel: | Sigge lehlakoreng kapa habeli ka mahlakore a mabeli: Planes * 1200mm |
| Mefuta e multilayer: 50mmm x 610mm (20 "x 24") | |
| Bophara ba mohala / sebaka: | 0.076mm / 0.076mm (0.003 "/ 0,003") / 3mil / 3mil / 3mil / 3mil / 3mil / 3mil / 3mil / 3mil / 3mil / 3mil / 3mil / 3mil / 3mil / 3mil / 3mil / 3mil / 3mil / 3mil / 3mil |
| Via: | E foufetse / e patiloe / plugged (Vop, VIP ...) |
| Hdli / Microvia: | Ho joalo |
| Phele: | Hasl, lf hasl |
| Ho qoelisoa khauta, khauta ea khanya ea khauta, monwana oa khauta | |
| Silver, Cormerice Tin, OSP | |
| Khetla ea khauta ea khauta, botenya ba khauta ho fihla ho 3um (120u ") | |
| Khatiso ea khabone, peelable s / m, enepig | |
| Ho palama: | CNC, Pushing, V-Cut |
| Equipement: | Tekanyo ea bokahohleng |
| Ho fofa ho fofa / seporo se khuts'oane | |
| Microscope e phahameng ea matla | |
| Kit ea STOREERARARARARARARARARARARARARARARARARARARARARASTE | |
| Teba ea Peel matla | |
| High volt e bulehileng e bulehileng le e khutšoane | |
| Moqhaka oa karolo ea karolo ea karolo ea karolo e nang le polisher | |
